Lessons Learned About Engineering

The Fall Management Standards Laid Out By American Society Safety Engineers The American Society of Safety Engineers has established sound safety standards that reduce chances of injuries in the workplace. For example, the systematic fall hazard protection approach requires three major phases, which are fall elimination, fall prevention and fall arresting Fall hazard elimination is the initial stage that entails assessing the workstation in the early work stage of a project and throughout the planning of different tasks. The aim of site assessment is to eliminate all potential fall risk factors as well as identify other applicable approaches that could be employed to increase safety and enhance productivity. Considering safety measures in the early stages of a project lowers safety risk factors and ensures that the staffs incorporate safety standards into regular work procedures. For illustration, the workers can set up anchorage at strategic locations to secure fall arrest systems hence promoting safety while reducing installation costs. The second phase involves fall prevention and it requires systematic assessment of the workplace to identify the fall hazards that could not be eliminated completely. Despite the fact that it is hard to eliminate the fall hazard totally, the management has a duty to improve the workplace and prevent fall hazards. The typical measures at this phase entail fixing of barriers, movement restrictions, handrails, staircases, and other structures that reduce chances of occurrence of safety hazards.
Engineering – My Most Valuable Tips
Fall arresting is the third step in the line of safeguarding workers against falls and it requires use of appropriate fall-arresting facilities. Various arresting systems are only employed when the fall risk cannot be removed, reduced or barred by changing the nature of the workstation or assuming proper work processes. Mostly, the equipment applied in this stage comprise of lanyards, harnessers, fall arresters, supports, safety nets, anchorages, and shock absorbers all of which lower the effect or the risk of injury if a fall occurs. This stage involves critical analysis of the workplace and work processes to determine the right equipment to install, where to install and how to use the equipment correctly to minimize the risk.
Case Study: My Experience With Engineering
Apart from these, the management of a project in which a significant fall hazard exist must create a written fall hazard prevention strategy that ought to be applied to manage or reduce the impact of the hazard. Besides, the management should include the safety requirements outlined in the fall protection plan in contract documents to ensure all the workers adhere to the set standards. All the employees performing at elevated positions must be trained to apply, examine and carry out simple maintenance on the fall arrest systems. In the event that any staff changes workplace or new fall protection equipment are installed, he or she must undertake refresher training.